Lifting
Winchs Tensioner
Lifting gear
Trolleys
Rollers
Gantry crane
Plumbers
Pressing
Wet/Dry Vacs
Pipe Fabrication
Plumber's tools
Hydraulic
Jacks cylinders
Electrical
Utility & Electricians Tools
1/2" - 2" NPT Hammer Chuck Machine
93287
The Model 535 maintains the ruggedness of the industry workhorse while adding the features that makes the threading operation more productive. A large chip tray and oil reservoir makes the 535 ideal for longer uninterrupted threading. The 535 is designed a36 RPM universal motor provides ample...
The Model 535 maintains the ruggedness of the industry workhorse while adding the features that makes the threading operation more productive. A large chip tray and oil reservoir makes the 535 ideal for longer uninterrupted threading. The 535 is designed a
- 36 RPM universal motor provides ample power for cutting threading and reaming 1/2" - 2" pipe.
- Integrated length gauge for accurate pipe cutting.
- Large oil reservoir for uninterupted threading
- Manual speed check with replacable jaws centers and grips pipe quickly.
- Includes 811A Die Head and dies for threading 1/2" - 2" pipe
- Can be used with geared Models 141 and 161 threaders.
- Uses Model 816/817 semiautomatic, Model 815A self-opening or Model 811A quick-opening die heads.
93287
Data sheet
- Chuck
- Speed Chuck™ with three replaceable rocker-action jaw inserts.
- Rear Centering Device
- Cam-action turns with chuck.
- Reamer
- 5-flute cone, RH, 1/8"-2" (3mm-50mm).
- Switches
- Forward/off/reverse and integral foot switch.
- Bolt Capacity
- 1/4"-2" (6mm-50mm).
- Pipe Capacity
- 1/8"-2" (3mm-50mm) 2 1/2"-4" (62mm-100mm), 4"-6" (100mm-150mm) with 141 and 161 geared threaders.
- Cutters
- Self-centering, full-floating. Two models available
- Oil Pump
- Self-priming gerotor oil pump.
- Reamers
- RH/LH combination reamer available.
- Type of product
- UNITES_SPECIALE_R
The Model 535 maintains the ruggedness of the industry workhorse while adding the features that makes the threading operation more productive. A large chip tray and oil reservoir makes the 535 ideal for longer uninterrupted threading. The 535 is designed a36 RPM universal motor provides ample power for cutting threading and reaming 1/2" - 2" pipe. Integrated length gauge for accurate pipe cutting. Large oil reservoir for uninterupted threading Manual speed check with replacable jaws centers and grips pipe quickly. Includes 811A Die Head and dies for threading 1/2" - 2" pipe Can be used with geared Models 141 and 161 threaders.Uses Model 816/817 semiautomatic, Model 815A self-opening or Model 811A quick-opening die heads.