Lifting
Winchs Tensioner
Lifting gear
Trolleys
Rollers
Gantry crane
Plumbers
Pressing
Wet/Dry Vacs
Pipe Fabrication
Plumber's tools
Hydraulic
Jacks cylinders
Electrical
Utility & Electricians Tools
1/4" - 4" NPT Hammer Chuck Machine
26092
The Model 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.Induction motor for constant speed, optimal torque & noise reduction. 12 or 36-RPM g for optimal...
The Model 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
- Induction motor for constant speed, optimal torque & noise reduction.
- 12 or 36-RPM g for optimal machine peformance.
- Integral through-head oiling system floods the thread lubricating the dies and clearing the chips.
- Includes 1/4 - 2" inch and 2-1/2 - 4 inch Die Heads.
- Mount on a workbench or RIDGID stand (sold separately).
26092
Data sheet
- Chuck
- Hammer-type with replaceable, rocker-action jaw inserts.
- Rear Centering Device
- Cam action.
- Nominal Pipe Capacity
- 1/4"-2" (6mm-100mm) @ 36 RPM, 2-1/2"-4" (65mm-100mm) @ 12 RPM, 4"-6" (100mm-150mm) with 161 Geared Threader.
- Bolt Capacity
- 1/4"-2" (6mm-50mm).
- Motor Control
- Reverse/off/forward, heavy-duty rotary-type and integral foot switch.
- Gear Box
- Two-speed gear box with a 3
- Oiling Pump
- Self-priming, gerotor-type, automatic-reversing, constant-flow.
- Oiling
- Through die head
- Type of product
- UNITES_SPECIALE_R
The Model 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.Induction motor for constant speed, optimal torque & noise reduction. 12 or 36-RPM g for optimal machine peformance. Integral through-head oiling system floods the thread lubricating the dies and clearing the chips. Includes 1/4 - 2" inch and 2-1/2 - 4 inch Die Heads. Mount on a workbench or RIDGID stand (sold separately).