PAMG3402NB, Turbo II Air Hydraulic Pump, 4-way Manual Valve, 180 in3/min Oil Flow at 100 psi

PAMG Series air over hydraulic pumps include a manual lever operated 3-way valve. As part of the Turbo II Air Hydraulic Series, they provide the power and speed needed for simple clamping circuits. PAMG3402NB, PAMG34S8N, PAMG5402NB, PAMG54S8N are for single-acting applications with a maximum operation pressure of 5000 psi (350 bar). The PAMG1405N and the PAMG1402N pumps are compatible with double acting tools and provide Advance / Hold / Retract functions. Maximum operating pressure of 10,000 psi (700 bar). Enerpac Turbo II Air Over Hydraulic Pumps generate the hydraulic pressure you need using the air pressure available. The Air Saver PisTon reduces air consumption, and the pump can start at low pressures from 50-125 psi. Turbo II Air-Hydraulic Pumps are best suited to medium or lower cycle applications. They provide all the power and speed needed for simple clamping circuits and single acting tools. At only 75 dBA, the Turbo II Series helps to keep the noise level to a minimum. Choose from a range with maximum working pressure of either 5,000 or 10,000psi, and various reservoir capacities from 116 - 462 in3 (2100 - 7500 cm3). Turbo II Air Over Hydraulic Pump Series: PATG - Treadle for foot or hand operation PARG - Pendant Operation PAMG - Manual lever operated. For double-acting applications PACG - For remote valve mount. For work holding, 5000 psi (350 bar). PASG - Includes mount for a single DO3 Valve. On-demand stall-restart operation maintains system pressure, providing clamping security External adjustable pressure relief valve (behind sight glass) Internal pressure relief valve provides overload protection Reduced noise level to 75 dBA Operating air pressure: 50-125 psi – enables pump to start at low air pressure** Hydraulic to air ratio: 45:1 Reinforced heavy-duty lightweight reservoir for applications in tough environments Five valve mounting options provide flexibility in setup and operation Fully serviceable air motor assembly User supplied valves ** NOTE: From 50-125 psi air inlet pressure. Performance is significantly diminished below 50 psi. Performance may vary compared to listed values due to seal friction, internal pressure drops and manufacturing tolerances. Be sure to allow some flexibility on air inlet pressure.