PLAS In-Line Rotary™ Pipe Cutters
search
  • PLAS In-Line Rotary™ Pipe Cutters
  • PLAS In-Line Rotary™ Pipe Cutters
  • PLAS In-Line Rotary™ Pipe Cutters
  • PLAS In-Line Rotary™ Pipe Cutters
  • PLAS In-Line Rotary™ Pipe Cutters
  • PLAS In-Line Rotary™ Pipe Cutters
  • PLAS In-Line Rotary™ Pipe Cutters
  • PLAS In-Line Rotary™ Pipe Cutters
  • PLAS In-Line Rotary™ Pipe Cutters
  • PLAS In-Line Rotary™ Pipe Cutters

PLAS In-Line Rotary™ Pipe Cutters

04470
Features Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe. Only 6"-8" clearance needed to turn PLAS tool around pipe. Cuts out-of-round pipe because of spring loaded nuts. With PVC models, simultaneously...
Application: PVC Sch. 40, PVC C900 & C905
Weight: 52
Pipe Capacity: 6 - 12
Sections Used: A, B, C

Buy this product

Features

  • Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
  • Only 6"-8" clearance needed to turn PLAS tool around pipe.
  • Cuts out-of-round pipe because of spring loaded nuts.
  • With PVC models, simultaneously cut and bevel PVC using cut-off blade and bevel blade.
  • Inexpensive tool for contractors to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs!

More Information

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC or PE pipe in trench or above ground. Each PLAS rotary cutter needs just 6” to 8” (153 - 203 mm) clearance around the pipe, making them easy to operate in trench and with lower prep costs. Outboard rollers keep the cutter aligned on pipe, ensuring a square cut every time. Each PLAS cutter also can produce, in-line with the cut, a 15° bevel on both sides of the pipe using bevel blade PLAS4B*. For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness. For cutting PE pipe**, REED developed a hardened, tool steel blade for best cutting results. The engineered blade tip drives chips out of the way while cutting PE. PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternate PLAS In-Line Rotary Pipe Cutter Blades.

 

*Bevel blade PLAS4B included with PVC models 04470, 04475, 04480 and 04485; can also be added to PE models. Contact REED for details.

**PLAS Cutter Specific Limitations for PE:
up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness

 

Proprietary tool cuts square on even the largest plastic pipe up to 28” (800 mm).

04470

Data sheet

Type of product
UNITE
Combinations reference Stock

Application : PE, HDPE,

Weight : 52,

Pipe Capacity : 6 - 12,

Sections Used : A, B, C

Stock :

04474

 04474

Available now


Application : PE, HDPE,

Weight : 57,

Pipe Capacity : 14 - 18,

Sections Used : B, C (2), D

Stock :

04477

 04477

Available now


Application : PE, HDPE,

Weight : 62,

Pipe Capacity : 14 - 24,

Sections Used : B, C (3), D

Stock :

04483

 04483

Available now


Application : PE, HDPE,

Weight : 68,

Pipe Capacity : 14 - 28,

Sections Used : B, C (4), D

Stock :

04487

 04487

Available now


Application : PVC Sch. 40, PVC C900 & C905,

Weight : 52,

Pipe Capacity : 6 - 12,

Sections Used : A, B, C

Stock :

04470

 04470

Available now


Application : PVC Sch. 40, PVC C900 & C905,

Weight : 57,

Pipe Capacity : 14 - 18,

Sections Used : B, C (2), D

Stock :

04475

 04475

Available now


Application : PVC Sch. 40, PVC C900 & C905,

Weight : 62,

Pipe Capacity : 14 - 24,

Sections Used : B, C (3), D

Stock :

04480

 04480

Available now


Application : PVC Sch. 40, PVC C900 & C905,

Weight : 68,

Pipe Capacity : 14 - 28,

Sections Used : B, C (4), D

Stock :

04485

 04485

Available now