-
Sales
-
Lifting
-
Plumbers
- Pressing
- Wet/Dry Vacs
-
Pipe Fabrication
-
Wrenches
- RapidGrip® Wrenches
- Grip Wrenches
- 2-Handle Wrenches
- Specific Purpose Wrenches
- Straight Pipe Wrenches
- End Pipe Wrenches
- Offset Pipe Wrenches
- Hex Wrenches
- Chain Wrenches
- Strap Wrenches
- Compound Leverage Wrenches
- Raprench® Wrench
- Spud Wrench
- Inner Tube Core Barrel Wrenches
- Adjustable Wrenches
- Chain Tongs
- Wrench (Various)
- Pipe Cutting & Fabrication
- Roll Grooving
- Threading
- Tube Repair & Joining
- Tube Cutting & Preparation
- Bending & Forming
- Pipe Bevelling
- Large diameter pipe tools
- Plastic Pipes
- Pipes Various Tools
- Threading Oil
-
Wrenches
- Plumber's tools
-
Hydraulic
-
Electrical
-
Utility & Electricians Tools
- Knockout Sets
- Conduit Benders
- Sizing Tools
- RE 60 Electrical Tool
- RE 6 Cable Termination Tool
- LR-60B Latching Round Crimp Head
- SC-60C Scissor Cutter Head
- Manual Hydraulic Crimp Tools
- Swiv-L-Punch™ Knockout Punch Head
- 4P-6 4PIN™ Dieless Crimp Head
- Cable Trimmers
- UC-60 Utility Crimp Head
- RE 600 Cable Termination Tools
- Test & Measurement
-
Utility & Electricians Tools
-
Lifting
- Rental
- Repair and certification
- About us
- Contact us
Two 3/8" x 8' (10 mm x 2.4 m) I.D. Hoses with 3/8" (10 mm) NPTF Male End on One Hose and 1/2" NPTF Male End
104101K2
Certified non-conductive redrubber
Double rayon braid
Working pressure 2,250 PSI (155 bar) tested to 75 kV/ft.for five minutes...
- Certified non-conductive redrubber
- Double rayon braid
- Working pressure 2,250 PSI (155 bar) tested to 75 kV/ft.for five minutes
Specifications
Color | Red |
Connection | 3/8 IN (10.000 MM) And 1/2IN NPTF Male Fitting |
Diameter | 3/8 IN (10.000 MM) ID |
Length | 8.000 FT (2.500 M) |
Material | Rubber |
Type | Non Conductive, Low Pressure |
Working Pressure | 2250 PSI (155 BAR) |
*Greenlee® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. |